Buy Low Price From Here Now
Tongue & Groove, 18 GA, Stapler For 3/8", 7/16", 1/2" Flooring, Easily Converts To Conventional Stapler With Front Nose Accessory, Precise, Drives Staples At 45 Degree Angle Every Time, Lightweight, Easy To Handle, 1/4" Crown 1" 18 GA, Galvanized Staples.
Readmore
Technical Details
- Versatile hardwood flooring tongue and groove stapler- Includes flooring shoe and conventional nose
- Drives staples at a 45-degree angle every time
- Lightweight, easy to handle
- 1/4-inch crown 1-inch 18-gauge galvanized staples
See more technical details
By V. Di Nenna (PA, USA)
Nailer works real well and is well built.
Only issue was the DVD is not make for this tool.
By B. Prince (new england)
Purchased gun to install 1/2" solid bamboo flooring was recommended by a lateral flooring manufacturer. It performed ok but jammed a few times and I had to shim angled foot to improve performance. I felt tool was a bit overpriced for a basic narrow crown stapler which can be purchased at any home improvement store for less tan $100. That makes the foot retrofit a very expensive accessory, but with limited sales potential the high price the manufacturer probably justifies the price....
By R. Brown (Indianapolis, IN)
I put some Bruce Natural Reflections 5/16" floor down a few years ago and used the Bostich stapler and it worked fine, but it's only good for this specialized application. I just installed 500 square feet more in an ajoining room and didn't want to rent, or buy a gun that would be useless for any other application after I was finished. I purchased the Porta-Nailer because it could be converted to a straight stapler also. I used Porter Cable 1-1/4 staples and this tool worked flawlessly. I used the straight stapler to put down 1/4" underlayment first and it was perfect for that too. I can certainly recommend this tool.
By Matthew P. Ritzmann
Perfect tool for the job. I installed 800 sq. ft. of Bellawood Brazilian Teak 5/16" floors without one problem from this tool. Would highly recommend this tool to anyone.
By Steven R. Benoit (Laporte, CO)
I bought this stapler because of the removable flooring foot - a rare feature. The stapler arrived in a nice case and in good condition.
The first problem came when connecting it to my air compressor - the fitting supplied with the stapler was a little out of spec and didn't let my air hose connection seat all the way, allowing the air hose to pop off. You may need to change this fitting depending on your air hose.
There's also something not quite right with the feeder - it fires a staple about 75% of the time, and the rest of the time it dry-fires.
Final issue - the flooring foot is designed for very thin flooring and is not adjustable. It didn't fit my 5/8" T&G flooring at all, so I ended up taking it off. However, the firing point is small enough that it's easy to position it on the tongue and lay flooring without the foot.
All the negatives being said, though, it's a very easy to use stapler, lets you get in pretty tight places, it's simple to reload, and it's easy to see how many staples are in the magazine. It's rugged and lightweight. So once you get used to the misfire rate, you can go pretty fast with it.
Images Product
Buy Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler Now
No comments:
Post a Comment