Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer

Buy Cheap Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer

Buy Low Price From Here Now
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8 to 2 Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing. Includes: Brad nailer and carrying case
Readmore

Technical Details

- Drives 5/8- to 2-Inch 18-gauge brad nails
- Tool free adjustable depth control
- Lightweight magnesium housing
- Oil-free operation
- 2.5-Pound; 1-Year warranty
See more technical details

 "Nail, Jam, Dry fire, Nail, Dry fire, Jam...." 2010-03-29
By James G. Wheeler (Maryland)
The tool is very light and comfortable to handle, but I was hoping for better performance. 50% of the time it dry fires (the pin actuates, and makes a dent in your work, but doesn't feed a brad). Then it jams about 5% of the time, which requires using the attached allen wrench, loosening the top of the (plastic!) nailer head, clearing the jammed brad, and trying again. I'm shooting 2" brads (Bostitch brand). This is a "reconditioned" model - i.e. somebody returned it previously. I think I know why.

 "Great nailer for the price !" 2010-03-28
By George Sanders
I bought this nailer based on previous reviews and ratings . I give it a 5 star rating for the price and an overall rating of 4 . I have used the nailer on pine board and trim /everyday use . The only problem that I have had were a few double feeds of the brads causing a jam . Easy to clear . I have used 1-9/16 and 2 inch brads so far and seem to shoot we'll and hold very good . Recently bought more brads at Lowe's and there was a good selection and were cheap . Very light weight gun and I would recommend a light weight Hose to move it around easier . which is next on my list to purchase . Very happy with my purchase .....

 "Great Nailer and Great Price!" 2010-03-22
By OUFAN75 (Tulsa, OK)
I am in the process of installing wood floors in my home and since I was going to be taking up the trim I needed a nail gun to make the installation of the trim go faster. When I received the box from Tool King I thought the case was empty because it was so light! This gun is the magnesium line and it is very light and durable. The plastic case it comes in weighs more. I wanted to test it out since I would not be ready for trim for a couple of weeks, so I fixed a kitchen drawer and a couple of window ledges with it. Plus I have heard good things about the Bostitch product line from friends. I highly recommend...can't beat the price!

 "Brad nailer" 2010-03-17
By G.I.P. Freely
This nailer jams frequently and the nose has to be unscrewed to remove the jammed nail. It is nice and light and the belt hook is convenient. But it is loud and the performance is sub-par, I've been generally disappointed with the nailer.

 "Good buy" 2010-03-15
By Jim (Connecticut)
The product arrived looking like it was brand new. Tried it out and was concerned by a little spark at the head when it fired the brad but I called Bostich and they told me that was normal for the first couple of rails. Have not used that many yet. This is a tool I bought for my shop but not one that will get a lot of use. It was a good buy and seems to work great.


Images Product

Buy Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer Now

read more “Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer”

Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler

Buy Cheap Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler

Buy Low Price From Here Now
The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.
Readmore

Technical Details

- High-capacity pneumatic upholstery stapler with 185 staple magazine
- Uses Senco C Type, 22-gauge, 3/8-inch staples from 1/4 to 5/8 inches long
- Quick and easy jam-clearing mechanism
- Measures six inches tall and nine inches long; weighs 2 pounds
- Includes a 1/4-inch air fitting with dust cover and oil
See more technical details

 "This is a Pro Stapler for sure!" 2010-01-22
By W. Gravning
Like any well made product the Porter Cable Upholstery Stapler is absolutely a delight to use. The 1" long extension is a must for anyone working on upholstery projects. We used it recently on some oak chairs using 3/8" fine wire staples from Amazon at 70psi. Follow the instructions and you should have no problems.

 "Performed Flawlessly" 2010-01-17
By Rodney McQueen (Illinois, USA)
Have done various reupholstering projects through the years and had always hand stapled. What a difference this this tool made! It reduced the time required to complete the project and greatly improved the quality of the work. It did not "misfire" once. It is lightweight and easy to use. I highly recommend the tool, at least for home use.

 "Great for artists stretching canvas" 2009-12-31
By Robert Bolton (Santa Fe, NM)
Tried all kinds of manual and electric staplers until read reviews on the Porter-Cable. Perfectly staples canvas in various hardness of woods. Does not use a lot of air - so you can get by with a small comprssor. Highly recommended.

 "excellent stapler" 2009-11-16
By yayamama (Western PA)
I bought this to replace one exactly like it that I have been using for 7 years. It broke because I FORGOT to oil it and the inside rusted....In conclusion take care of your tools and this is an excellent one.

 "WOW, great tool and Recommded" 2009-11-05
By Electric Z (Oregon)
Upon receiving this stapler I was using it within 10 minutes of the UPS delivery. It came with the air fitting already installed. I slapped some 1/2" staples in it and I was off working. It has a great ergonomic handle that feels great in your hand and is lightweight. My wife likes it too!



The stapler is of the high Porter-Cable expected quality. It made short work of my first project and expect many more hours of use. This tool is made for working. As fast you can pull the trigger the staples are set deep and no jamming. Recommended and the price was very reasonable.



Here it is a month later and wanted to add a couple thoughts since first purchase. First, it is working great and I am very happy.



Next, some have commented about a possible safety feature missing in that staples can be freely shot out, (no device needs to be pushed against the object being stapled first). After using it a lot, quite frankly I would find it a nuisance if there was such device. When working with fabric or some other material it would be a major impediment to have to reposition the stapler, push down and then pull the trigger. When stapling many staples with its current design you can just slide the stapler to the next position pull the trigger and move on. Much more efficient and faster.


Images Product

Buy Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler Now

read more “Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler”

Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case

Buy Cheap Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case

Buy Low Price From Here Now
Lightweight, air-operated staple gun is easy to use on a number of projects. Accepts a variety of staple sizes for different applications. Operating PSI: 60 - 100, Fasteners Used: No.4 Staples, Fastener Sizes (in.): 1/4, 5/16, 3/8, 1/2 and 9/16, Fastener Capacity Per Strip: 100, Coil or Strip: Strip, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Case Included: Yes, Tool Length (in.): 2.9, Tool Weight (lbs.): 8 29/32
Readmore

Technical Details

- Drives 1/4" thru 9/16" staples
- Safety mechanism prevents accidental firing
- Quick release magazine for easy loading
- Adjustable air exhaust & Staple viewer
- Staples to be used with this gun include B000BQUGRA and B0000BYC2R
See more technical details

 "Surebonder 9600" 2010-03-25
By Donald Wright
I used the 9600 stapler for the first time today.

I had a 860 sq/ft house to insulate.

I used the 9600 for approx. 2 1/2 hrs. with a 6 gallon air tank compressor at 60-70 psi. before I became aware that I neglected to turn the compressor ON.

I am completely satisfied with my purchase of the "Surebonder 9600". I would and will recomend this tool to others without any reservations.

Thank you,

Donald Wright

Seattle,Washington

 "used once, worked great" 2010-03-24
By M. Simmons (New Braunfels)
I bought a new electric stapler, never used it, took it back. This stapler was cheaper and better. I used it to repair some boat seats. Used the monel T-50 staples. My wife did the shooting, worked GREAT.

 "Trigger continuously malfunctions" 2010-03-22
By Gail K. Trautwein (Pitman, Pa. United States)
I am disappointed with this staple gun as the trigger mechanism slips out of place after about every five or six staples. I have to use a screwdriver to force the trigger back into position in order for it to work again. I would have returned the unit but I needed it to complete an upholstery project for which I had a timeline. I would definitely not recommend buying this product.

I had read other reviews which were positive, so perhaps I just received a lemon??

 "Easy, feels durable, did the job" 2010-03-19
By J. Douglas (Michigan)
I bought this because my bostitch staplers were a bit too big for my wife's apholstery project. It worked great. She actually enjoyed using it once I set the air compressor up for her and showed her how to connect the hoses (2 minute lesson only). The size is nice since it uses the same staples that manual staplers use. We were able to buy the smaller packages of staples at Target and they worked perfectly as did our older box of staples that have been in my toolbox for 10 years. We did not experience any jams like some reviewers mentioned. Unless the jam damaged the tool I guess I would just un-jam it and not worry about it too much unless it happened over and over again. Anyway - no jams in our use and that was with staples from Target and 10 year old staples from the bottom of my toolbox. The case is nice, too. Overall the tool is very nice for the price so far.

 "perfect" 2010-03-18
By R. Moses (KY USA)
Bought this to reupholster 6 kitchen chairs. Worked great and at a cost of under $30 delivered it was well worth it. I used the T50 staples without any problems!


Images Product

Buy Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case Now

read more “Surebonder 9600 Pneumatic Fine Wire Staple Gun with Carrying Case”

Stanley Bostitch Contemporary Full Strip Stapler (B2200BK)

Buy Cheap Stanley Bostitch Contemporary Full Strip Stapler (B2200BK)

Buy Low Price From Here Now
Get comfortable - sleek, ergonomic design offers comfortable hand-held use. Staples up to 20 sheets. Versatile desktop style staples, pins and opens fully for tacking. Plastic and metal construction. 3" throat depth. Top loads a full strip (210) of 1/4" standard staples. Black. Manufacturer’s one-year warranty. All sheet capacities are based on 20-lb. bond.
Readmore

Technical Details

- Contemporary full-strip, 20-sheet stapler with ergonomic design staples, pins and tacks.
- Get comfortable - sleek, ergonomic design offers comfortable hand-held use.
- Staples up to 20 sheets.
- Versatile desktop style staples, pins and opens fully for tacking.
- Plastic and metal construction; black finish.
See more technical details

 "It works!" 2010-03-12
By C. J. Vazquez
This is not a luxury office item. This stapler is about as basic as you can get but it delivers what it promises. The overall feel of the stappler could be a bit sturdier but I haven't had any problems with pieces coming loose or anything like that. It made it to my four star rating because of the unbeatable price but fell short of the five stars because it doesn't offer anything special.

 "Stanley Bostitch stapler" 2009-09-08
By Leilani
I bought this stapler for work. It works very well. Great value and fast shipping. Thank you!

 "Great Stapler" 2006-10-06
By Troy
This stapler is great. It works very well and staples many papers together. If you take the top of, it becomes stainless steel. Ya its a pretty awsome stapler.


Images Product

Buy Stanley Bostitch Contemporary Full Strip Stapler (B2200BK) Now

read more “Stanley Bostitch Contemporary Full Strip Stapler (B2200BK)”

The 2006-2011 World Outlook for Manufacturing Power-Driven Hand Tools, Drills, Screwguns, Circular Saws, Chain Saws, Staplers, and Nailers

Buy Cheap The 2006-2011 World Outlook for Manufacturing Power-Driven Hand Tools, Drills, Screwguns, Circular Saws, Chain Saws, Staplers, and Nailers

Buy Low Price From Here Now
WHAT IS LATENT DEMAND AND THE P.I.E.?

The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).

The latent demand for manufacturing power-driven hand tools, drills, screwguns, circular saws, chain saws, staplers, and nailers is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.

For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is neve
Readmore

Technical Details

See more technical details

Images Product

Buy The 2006-2011 World Outlook for Manufacturing Power-Driven Hand Tools, Drills, Screwguns, Circular Saws, Chain Saws, Staplers, and Nailers Now

read more “The 2006-2011 World Outlook for Manufacturing Power-Driven Hand Tools, Drills, Screwguns, Circular Saws, Chain Saws, Staplers, and Nailers”

Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler

Buy Cheap Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler

Buy Low Price From Here Now
Campbell Hausfeld 2 - in - 1 18 - ga. Nailer / Stapler. Superior versatility, GREAT LOW PRICE! There's a LOT you can accomplish with one of these in your hand. Stuff you just couldn't do without it. You can't finish trim with a stapler, and you can't attach wiring with a nailer. But you can get the tool that does both. From fastening insulation, to carpeting, to upholstery, to finishing door and window trim, you won't miss a beat... just change out your fasteners in the 2-in-1 magazine and get to it! The goods: Accepts 18-ga. brad nails 1/2"-1 1/4" long, and 18-ga. 1/4"-crown staples 1/2"-1 1/4"long; No-mar tip won't dent the wood; Adjustable depth control lets you control the depth of drive in various types of wood; Adjustable exhaust lets you easily change the direction of air exhaust away from the project; Quick-clear nose lets you remove nail jams quickly, reducing downtime; Rubber comfort grip for long periods of use.; Includes: 2-in-1 Nailer / Stapler ; 1,000-count 1" staples; 1,000-count 1" brad nails; 1/4" industrial plug- 1/4" NPT; 2 allen wrenches; Bottle of nailer oil; High-impact carry case.; Order yours today! Campbell Hausfeld 2-in-1 18-ga. Nailer / Stapler
Readmore

Technical Details

- Combination brad nailer and stapler ideal for specialty work
- Features rubber comfort grip, adjustable depth control and quick clear nose
- Ideal for trim work, crafts, paneling, cabinet assembly and more
- Side-loading magazine with capacity of 100 fasteners (18 gauge brad nails or 1/4-inch staples)
- Includes 1,000 1-inch brad nails, 1,000 1-inch staples, 1/4-inch industrial plug, 2 Allen wrenches, bottle of nailer oil, and high-impact carry case
See more technical details

 "The right tool for the job" 2009-01-28
By E. Schlichtenmyer
Good shopping experience.

Good information on the tool.

The tool came ready to work and work it did. It was precisely what we needed to finish the trimwork in our dining and living rooms.

 "GREAT QUALITY, EXCELLENT PRICE" 2008-05-22
By Leda Maria (Forida,Miami USA)
NO COMPLAINTS AT ALL ABOUT THIS PRODUCT, IT HAS A NICE SHAPE AND A NEAT BODY FINISHED, EXCELLENT QUIALITY OF MATERIAL AND i THINK i FELL IN LOVE WITH THAT INTENSE BLUE COLOR, BESIDES OF THAT IT WORKS GREAT!

 "Lot of double taps..." 2004-12-18
By KRASSEL (SPANAWAY, WA USA)
I have had this gun awhile. I bought it cause it was inexpensive and I don't use nails or staples a lot, but when I need em I do need em. As the wise man said "only a rich guy can afford cheap tools".

First of all the soft nose does prevent you causing a divot in your workpiece, but the plunger makes up for it. It really makes a "slot" in your wood. Hard to hide, unless you have a putty that match's the wood perfectly. It drives the nail or staple quite deep and even with the air adjusted lower it will sometimes drive the nail or staple too deep, leaving it protruding out the backside of the two pieces. Very irratating.

This tool is prone to "double taps"....firing twice..one on top of the other...keep a pair of needle nose pliers handy...more scar's on the wood.It also will pick up two nails at the same time and try and drive em into the same hole (keep those needle nose handy). It jams a lot. The "adjustment" for nail length is a pain.

It is comfortable to hold and lightweight, other than that I can't recommend it.


Images Product

Buy Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler Now

read more “Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler”

Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow

Buy Cheap Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow

Buy Low Price From Here Now
Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight.
Readmore

Technical Details

- Uses both cleats and staples
- Air operated
- Includes all accessories and carrying case
- Uses l cleats and u staples
- Air booster chambers for better nail driving
See more technical details

 "Great tool for the price" 2010-03-29
By kurtgo (Colorado, United States)
after reading other reviews, I decided to buy this tool to lay oak flooring (400 sq ft) instead of renting a tool (I have done this in the past). I oiled the tool well before starting and the nails were a fraction of an inch off from the nail bed with the wood I got from holme thepot. So I removed the white spacer on the bottom and added a couple of pieces of paper to shim it. Then it worked great! I wish I had bought it for my last job.



The tool comes with a hammer (although not in the pictures), spare o-rings, and some tools to disassemble the tool if needed.

 "Great Tool" 2010-03-26
By Michael (Michigan)
This tool is worth twice the price. Flawless operation makes it a joy to operate.

 "Great Gun" 2010-03-20
By J. Honaker (Millville, NJ USA)
I own a small home repair & improvement company and decided to try this item out. I do such a wide range of projects its pretty much impossible for me to have a super expensive tool for everything. With the great price tag on this gun it seemed a much better option then repeatedly renting one a couple times a year. The gun is surprisingly well built and comes w/ 2 no-mar foot plates, one for 1/2"-5/8" flooring & 1-for 3/4" flooring. I used the gun for shooting 2" L-Type flooring nails thru bamboo flooring without any problems, I did have a couple nails that had to be set with a nail punch but that could have been from me not striking it squarely or my pancake compessor recovering. I did not try the gun w/ staples though it seems to me that it would work equally as well. Although I have not owned this tool for an extended period of time and cannot say how it will hold up over the long term, I would recommend this product to anyone. It seems to be a great flooring gun and does not cost a ridiculous 3-$500. The only reason I dont give it 5 stars is because the cardboard box it comes shipped in looks cheap n might have a miss spelled word or two on it which is a little scary at first until you open everything up and find a really nice flooring gun inside.

 "Damages the wood" 2010-03-18
By B W (A.G. CA)
Used this on about 100 sq ft before having to call it quits. The gun marred the edge of the wood near the tongue. After messing with the base plate and inspecting the gun I had the same results. It was ruining my wood! I tried to hit the plunger softer but only to find it would not sink the nail. Hit it too hard and had to replace the wood.

 "Bargain priced/quality product" 2010-03-14
By Richard Krehn Jr. (Michigan)
As a professional installer I was alittle leary of such a "bargain priced" product. I am normally a firm believer in you get what you pay for. I just finished installing 600 sq ft of Bamboo. I used some staples and cleats just to see how easy this gun could use each. This gun fired EVERY staple and cleat to perfect depth every time. I had the pressure set at 80# and not one misfire or fail. Like some of the other reviewers on this product I had to shim the base plate some for proper allignment for staple/cleat placement. To say the least I was very satisfied with my purchase of this gun and would recommend this product to anyone. I am not employed by nor afiliated/associated with Amazon or Ramsond in any way shape or form, i am not a professional reviewer like some, I did not and will not receive any compensation in any form for this review. This is 100% my opinion and truthfull to my experience.


Images Product

Buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow Now

read more “Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow”

Bostitch CPACK300 3-Tool and Compressor Combo Kit

Buy Cheap Bostitch CPACK300 3-Tool and Compressor Combo Kit

Buy Low Price From Here Now
Includes 2.0 HP (Peak) Oil-Free Compressor - CAP2000P-OF-R, 2" 18-Gauge Brad Nailer - SB-1850BN, 1-1/2" 18-Gauge Finish Stapler - SB-150SX, 2-1/2" 16-Gauge Straight Finish Nailer - SB-1664FN, 1/4" x 40' Heavy Duty Airline With Fittings, Tool Lubricant, Contractor's Canvas Tool Bag
Readmore

Technical Details

- CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, large 6-gallon reserve tank, impact-resistant shroud to protect-Gauges, weighs only 38-Pound.
- SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 18-Gauge brads 5/8-Inch to 2-Inch in length
- SB-150SX Finish stapler featuring bottom-load magazine, tool-free adjustable exhaust and no mar tip. Drives 18-Gauge 7/32-Inch narrow crown finish staples 1/2-Inch to 1-1/2-Inch in length
- SB-1664FN Finish nailer featuring quick release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 16-Gauge straight finish nails 1-1/4-Inch to 2-1/2-Inch in length
- Accessories include: 1/4-Inch by 40-Feet PVC air hose with fittings, 1000 1-1/4-Inch brads, 1000 1-Inch staples, 1000 finish nails, tool lubricant and canvas carrying case
See more technical details

 "Bostitch" 2010-02-01
By D. Sperle
I purchased this on-line rather because it included the combo kit that I could not find in stores. It has been great. I changed out 7 windows and used this to help replace all of them. The compressor and nailer worked great just like I knew they would. Had an oil spill during from the bad oil bottle included but all else is great.

 "Art Not too happy" 2010-01-19
By Eva A. Muniz (USA)
I tried contacting Bostitch to let them know that my bag was torn. I get no reply or help. I know that I bought a recondition item, but did not expect to get a torn bag. Surly a conmpany like Bostitch can afford a $25.00 bag to put their recondition tools in. If I don't get a reply, I will not do business with them again.

 "Great purchase..." 2009-09-08
By Jorge Navarrete
This item was purchased based on it's price.I needed a nail gun and compressor combo, after shopping around, Amazon had the best price.I allready started useing it and am glad to say, I am completely satisfied with this product.

 "Consider the CPACK1" 2009-07-20
By E. Richards (San Jose CA)
I don't have this kit but do have the CPACK1 and a F21PL Framing Nailer.

If you don't want to pay this much I'd recommend you look at CPACK1 ($199). I've been able to do all the trim around the house - base, door, crown & bookcases with the finishing nailer (you don't get the other 2 nailers with the CPACK1).



I wonder if for most stuff around the house whether the other guns and price are really needed. I'm yet to need the use of a dedicated stapler - I haven't used one staple yet which btw also works with the finishing nailer.



I did spend $50 to get a soft 50' 1/4" hose though because it is not included in the other kit.

Bostitch CPACK1 2-in-1 Brad Nailer/Narrow Crown Stapler Tool and Compressor

 "Every woodworker should have one" 2009-06-27
By Grump (Palatine, IL United States)
The ability to fasten accurately is much greater with this tool than a hammer and nail. It is easy to use and speeds up any project.


Images Product

Buy Bostitch CPACK300 3-Tool and Compressor Combo Kit Now

read more “Bostitch CPACK300 3-Tool and Compressor Combo Kit”