Buy Low Price From Here Now
Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2" length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32".
Technical Information:
Minimum Operating Air Pressure: 60 PSI 4 bar
Maximum Operating Air Pressure: 100 PSI 7 bar
Staple Length Range: 1" - 2" 25.4 mm-50.8 mm
Staple Size: 16 Guage
Staple Capacity :92
L-shaped Nail Length Range:1-1/2" - 2" 38.1 mm-50.8 mm
L-shaped Nail Size: 15-1/2
L-shaped Nail Capacity:100
Air Inlet:1/4 inch NPT 6.35 mm
Air Consumption:4.5 CFM 4.5 CFM
Package Includes:
Carrying Case
2 in 1 Flooring Cleat Nailer / Stapler
Mallet
Safety Glasses
Air Tool Oil
Base Plate
S3 Hex Key
S4 Hex Key
S5 Hex Key
Wrench-Special
Instruction Manual
Readmore
Technical Details
- Light weight die-cast aluminum body. 2 in 1 Flooring Cleat Nailer / Stapler. Colors may differ!- Operates with any standard compressor using pressure of 60 to 100 psi.
- High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth.
- Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation.
- We currently ONLY ship these TOOLS inside USA via fedex ground.
See more technical details
By D. A. Dierks (Seattle, WA)
Arrived from seller earlier than anticipated due to FedEx shipping. Probably why the shipping cost more than $50. My daughter was happy, though, since I could start on her flooring project sooner. Tool is heavy duty but not overly heavy, nicely weighted. Tighten all the bolts right out of the box. Mine started leaking oil after a week so I tweaked the bolts. Tool is made in China so I guess it went through a few climate changes before arriving at my doorstep which would have loosed the bolts. The handle on the mallet arrived loose. I think they used green lumber for the handle and it shrunk. Solved the issue with a couple more steel wedges in the handle. Used the nailer for 1/2" bamboo flooring which is not quite 1/2" thick, more like 7/16". Therefore, I had to add some washers between the shoe plate and the base of the tool to set the nails in the right place. The strike is pressure sensitive and will not fully set a nail if not hit with enough force. Only takes a few hits to get the hang of it. However, I liked the sensitivity for nailing smaller pieces without splitting them. Tool worked so well I was able to teach my daughter to use it while I cut boards to length. Price was far less than renting a nailer for a couple of weeks and I have it for the next project.
By K. Osborne
If you're thinking twice about this tool, don't. I thought "how can this be so much cheaper than the name brands and not be cheaply constructed?" I was so wrong, this tool is well made and does just as good of a job as the name brand tools. It also takes your standard flooring nails. Great product.
By Rainy (NY USA)
Bought this tool to do the entire downstairs (800squarefeet). It has been just wonderful. I have no complaints and only praise! I can't comment on how it would hold up in a professional capacity....but I have several friends in line to use it next!
By Samson in Buffalo (Buffalo, NY / USA)
This tool has proven to be a very useful purchase for do-it-yourself home floor installation. It has proven to be a good alternative to tool rental and probably less costly for installation in multiple rooms. It took a short time to adjust to the tool and the first few nails were not driven properly due to my not having used sufficient force. Has worked flawlessly since I have adjusted to it. Easy to use. Would recommend it.
By Hubstermeister
I've heard of other saying their product leaked. Mine did too. But I took it apart, back together, then did 800 sq-ft of floor with it and no problems. Seems fine to me. They supply a nice case and a rebuild kit and other goodies. Cheap tool but I think it'll survive doing the other 2000 sq-ft of the house.
Images Product
Buy Hardcore Tools® Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Now
No comments:
Post a Comment