Buy Low Price From Here Now
Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight.
Readmore
Technical Details
- Uses both cleats and staples- Air operated
- Includes all accessories and carrying case
- Uses l cleats and u staples
- Air booster chambers for better nail driving
See more technical details
By Cristophre G. (Seattle)
I'm 300 sq ft into a 650 sq ft project. We are doing 5/8 engineered hardwood. The flooring looks great! This tool is built quite stout and is very easy to use. As long as you tap it with just a bit of effort it will power the nail in flush... a light tap and you will be on your knees fixing it. That is not to say you have to hammer it to get it to work... I'm saying that modest swipes get it done right every strike. I started at 90psi, but moved to 95 psi and haven't looked back. It doesn't scuff the floor and came with two different floor plates for four different thicknesses. I have been using 2" bostitch L nails. Holding strong and tight even on an old old sub floor from the 60's. I had my doubts about the subfloor, but these nails and tool are putting them in good and strong.
If I had to complain I would say that loading the nails is fine with one caveat. Getting the sliding cover back down over the strip of nails requires some fiddling and feels like the weakest part of the gun. If I had to guess where this will fail, in the end, I would have to say that something in this area will give. The nailer comes with a package of all the rubber O rings so even if they fail it should be simple, with the included instructions, on how to replace them. I experienced no leaks or hisses when I started with the gun (despite forgetting to add the included oil drops) and when I realized I had forgot the next day I added a couple drops and still feels like it is ready for more work! With that 1 caveat I still believe this is one of the best bang for your buck tools I've come across. I'm using this with a small duty Makita Mac700 compressor and getting about 7 or 8 nails before it starts up and refills to keep pressure up. I have yet to have to wait for the compressor as I get a set of boards ready and even if I keep nailing past 10 or 12 nails, they are still going in flush; both seem very efficient.
The gun looks like a bad boy. Very well built. Good looking. Easy grip rubber handle (so grippy it started my hand off raw, but they are becoming nice callus's so still good). Nothing leaks. Nails go in flush. Efficient use of air. Helps pull boards even tighter. The rubber mallet I've received seems to be constructed as I would expect; solidly! I've heard complaints about this, but mine was more than fine.
For the curious and inexperienced, this is what you need to make this tool work. Get a compressor that can handle over 90psi, get a 3/8" air hose of 25 or better 50', get 1/4" couplers for either end of the hose, and some L nails for flooring or flooring staples. 2" are working for me, but if you've got new plywood subfloors you may consider 1 1/2" and a bit more pressure. These are the things you need just to get nails into the floor. You will need the tar or rosin paper, chalk box and chalk, tape measure, pencil and/or sharpie, nail set, some nails for face nailing the first 2 rows, color matched putty to cover the first row of face nail holes, compound miter saw and/or 5 1/4, 6 1/2 or 7 1/4 wormdrive saw (unless left handed then a right side circular saw will work) pry bar, nail set, jig saw and perhaps a few other little tools here and there. voila, you are set to become a flooring grunt! Your back and hands are going to hurt if you don't make the effort to keep your back straight and don't wear some work gloves.
By kurtgo (Colorado, United States)
after reading other reviews, I decided to buy this tool to lay oak flooring (400 sq ft) instead of renting a tool (I have done this in the past). I oiled the tool well before starting and the nails were a fraction of an inch off from the nail bed with the wood I got from holme thepot. So I removed the white spacer on the bottom and added a couple of pieces of paper to shim it. Then it worked great! I wish I had bought it for my last job.
The tool comes with a hammer (although not in the pictures), spare o-rings, and some tools to disassemble the tool if needed.
By Michael (Michigan)
This tool is worth twice the price. Flawless operation makes it a joy to operate.
By J. Honaker (Millville, NJ USA)
I own a small home repair & improvement company and decided to try this item out. I do such a wide range of projects its pretty much impossible for me to have a super expensive tool for everything. With the great price tag on this gun it seemed a much better option then repeatedly renting one a couple times a year. The gun is surprisingly well built and comes w/ 2 no-mar foot plates, one for 1/2"-5/8" flooring & 1-for 3/4" flooring. I used the gun for shooting 2" L-Type flooring nails thru bamboo flooring without any problems, I did have a couple nails that had to be set with a nail punch but that could have been from me not striking it squarely or my pancake compessor recovering. I did not try the gun w/ staples though it seems to me that it would work equally as well. Although I have not owned this tool for an extended period of time and cannot say how it will hold up over the long term, I would recommend this product to anyone. It seems to be a great flooring gun and does not cost a ridiculous 3-$500. The only reason I dont give it 5 stars is because the cardboard box it comes shipped in looks cheap n might have a miss spelled word or two on it which is a little scary at first until you open everything up and find a really nice flooring gun inside.
By B W (A.G. CA)
Used this on about 100 sq ft before having to call it quits. The gun marred the edge of the wood near the tongue. After messing with the base plate and inspecting the gun I had the same results. It was ruining my wood! I tried to hit the plunger softer but only to find it would not sink the nail. Hit it too hard and had to replace the wood.
Images Product
Buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow Now
No comments:
Post a Comment