Buy Low Price From Here Now
Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight. It comes with an extra-wide composite non-marring base plate for added stability and protection against scratches to the flooring surface. It provides a conveniently long reach handle with an ultra-padded cushioned grip for balance and optimal operating comfort, stability and safety. Internally, the driver blade is constructed of a very tough heat treated and hardened steel. The composite base plate designed to allow the user to drive fasteners much faster and closer to the wall while protecting the flooring surface from marring. This ergonomically designed multifunctional tool is manufactured under the strict ISO guidelines for quality control. With nearly 30,000 sold, this product has become a symbol for reliability and durability.
Readmore
Technical Details
- Uses both cleats and staples- Air operated
- Includes all accessories and carrying case
- Uses l cleats and u staples
- Air booster chambers for better nail driving
See more technical details
By croooowe (RTP, NC)
Like so many people here, I was turned off by the $350+ price of the name brand pneumatic floor nailers/staplers and saw the many good reviews on this unit. I was very hesitant to buy off brand but decided to give it a try and am now very happy that I did.
I just finished a 200sf room using this as a stapler and it was nearly flawless. I had one misfire when it got to the end of the staples but it did not damage anything. Another time I realized that I was having issues was after I had swapped tools which required adjusting the air pressure. When I adjusted back I apparently was a little higher on the pressure than before and it was crushing the wood a bit. Readjusted back down and it worked perfectly again.
Notes:
Used the recommended Bostitch staples with great success.
Stay on the low side of the recommended working pressure, and it is still plenty powerful.
Also, although it never caused an issue before I did it, I followed others suggestions and used two layers of duct tape on the 3/4 base for Bruce flooring so as not to have the nozzle catch the tongue.
Not sure if they upgraded or reworked or if I got lucky but many reviews complained about the mallet coming apart and my mallet survived my project in tact and I did not go easy on it.
I know for the price and based on the time I was using it around my job and life, it was much cheaper than renting it from anywhere and it worked very well for me. I cannot vouch for long term use but if you want to justify the purchase to redo a room or two, I would definitely highly recommend this unit.
By D. Ray (CT)
I bought direct from Ramsond and the tool arrived with a hole in the housing. I didn't open the package and find the defect until (2) weeks after it arrived. My mistake! Ramsond will try and charge you shipping back to them plus a $35 inspection fee plus shipping back to you unless you report the defect within (1) day. Even if you report defects within (1) day you still pay for shipping to them plus the $35 inspection fee! I'm not making that up, check their web policy. That adds up to between $60 to $80 even if the tool is defective right from the factory. Ouch!
It appears Ramsond makes a good product but their customer service is terrible. I felt like a thief just trying to get them to work with me.
Buy from Amazon, they have customer service which works.
By Golfwizard (Rochester, MI)
I laid 260 square feet of floor and never had one problem. The nailer worked great and was easy to use. I could have rented, but by the time I would have finished the floor, I would have paid for the gun. Now I can do the dining room and living room floors with no additional cost.
By K. Crocker (Durham, NH USA)
I have now used this nailer to put down 700 sq ft of hardwood flooring in my daughter's house in Hawaii. It worked perfectly with only one adjustment needed on my part. The single adjustment was adding a thin shim to the floor plate to make the staples hit the correct spot at the base of the tongue in the 1/2 inch thick flooring. the included manual was very close on the actual air pressure settings needed and had a section on how to clear a jammed staple which we needed to do twice. The cost of the tool plus shipping to Hawaii was less than the rental cost of a floor nailer in Honolulu for 4 days and we can resell the tool afterward. What a great way to spend the winter months of New Hampshire away from the snow and ice, laying hardwood floor.
By Robert E. Quinn (MONCKS CORNER SC)
BOUGHT THE RAMSOND FLOOR NAILER TO INSTALL A HARDWOOD FLOOR IN MY HOME.I WAS A LITTLE NERVOUS AT FIRST IN ATTEMPTING TO DO A MAJOR FLOOR INSTALATION, WITH THE RAMSOND FLOOR NAILER IT MADE THE JOB EASY,NO JAMS OR MISFIRES THE ONLY BAD THING THE JOB TURN OUT SO WELL MY WIFE WANT ME TO DO THE OTHER ROOMS GREAT FLOOR NAILER FOR THE PRICE.
Images Product
Buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow Now
No comments:
Post a Comment