Buy Low Price From Here Now
Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight. It comes with an extra-wide composite non-marring base plate for added stability and protection against scratches to the flooring surface. It provides a conveniently long reach handle with an ultra-padded cushioned grip for balance and optimal operating comfort, stability and safety. Internally, the driver blade is constructed of a very tough heat treated and hardened steel. The composite base plate designed to allow the user to drive fasteners much faster and closer to the wall while protecting the flooring surface from marring. This ergonomically designed multifunctional tool is manufactured under the strict ISO guidelines for quality control. With nearly 30,000 sold, this product has become a symbol for reliability and durability.
Readmore
Technical Details
- Uses both cleats and staples- Air operated
- Includes all accessories and carrying case
- Uses l cleats and u staples
- Air booster chambers for better nail driving
See more technical details
By K. Crocker (Durham, NH USA)
I have now used this nailer to put down 700 sq ft of hardwood flooring in my daughter's house in Hawaii. It worked perfectly with only one adjustment needed on my part. The single adjustment was adding a thin shim to the floor plate to make the staples hit the correct spot at the base of the tongue in the 1/2 inch thick flooring. the included manual was very close on the actual air pressure settings needed and had a section on how to clear a jammed staple which we needed to do twice. The cost of the tool plus shipping to Hawaii was less than the rental cost of a floor nailer in Honolulu for 4 days and we can resell the tool afterward. What a great way to spend the winter months of New Hampshire away from the snow and ice, laying hardwood floor.
By Robert E. Quinn (MONCKS CORNER SC)
BOUGHT THE RAMSOND FLOOR NAILER TO INSTALL A HARDWOOD FLOOR IN MY HOME.I WAS A LITTLE NERVOUS AT FIRST IN ATTEMPTING TO DO A MAJOR FLOOR INSTALATION, WITH THE RAMSOND FLOOR NAILER IT MADE THE JOB EASY,NO JAMS OR MISFIRES THE ONLY BAD THING THE JOB TURN OUT SO WELL MY WIFE WANT ME TO DO THE OTHER ROOMS GREAT FLOOR NAILER FOR THE PRICE.
By C. L. Tackett (Lexington, SC USA)
Purchased to lay ~800 sq ft of 3/4" prefinished oak (5" wide planks) in my house. Worked well, used 2" staples. Comes with bases for different thickness flooring. Unfortunately, even when using the base for 3/4" flooring, we still had to 'shim' the base with several layers of duct tape to get the flooring staples to go in at the correct place on the tongue of the flooring. This was mentioned in other Amazon reviews as well (and the instructions for the flooring we nailed down), but it is something to note. If you are nailing down the flooring and tearing up the tongues of the wood, break out the duct tape :). Other than that, nailer seems well made, and not "plasticky". I couldn't justify paying $400-500 for a name-brand nailer for what I was doing. I'm nailing down 4 seperate rooms of flooring, each on a weekend, and the cost of this nailer covers what it would have cost me to rent one.
By Michael P. Desjardins (Maine)
I just recieved my nailer. I have not used it yet but the visual quality is excellent. I have also borrowed one of the high end nailers. They are very similar in feal and exterior quality. This one even has a rubber grip that the high end unit does not have. I am anxious to compare the operation of the two units side by side. This appears to be a good unit for a home owner. Hammer is cheap but I can buy a pretty nice hammer for the 300 I saved. I will return with a report once I use this unit.Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow
By Gustavo Barrera (Mahwah, NJ)
Before purchasing this cleat nailer, I had never conducted a hardwood floor installation. I was on the verge of purchasing a Bostich Manual nailer but thankfully I saw this pneumatic nailer listed on Amazon. My only comment is that this Ramsond nailer is the best $200 investment of my do-it-yourself life. I ordered it and it arrived within 4 days in perfect condition. I then used it to install approximately 650 square feet of 3/4" Bruce Hardwood flooring. The total project used approximately 3000 cleats. I had ZERO misfires or jams. The only problems were caused by MY failure to properly strike the piston with the mallet. As a matter of fact, it took only about 5 practice cleats to determine how to use this nailer. The nailer itself is extremely sturdy with a handle that feels comfortable since it has a nicely designed rubber grip. I found that setting my air compressor to 105 to 110 psi yielded the best results for my floor. The key to using this tool is to firmly hold the nailer down while striking the piston with a steady mallet stroke. I installed pre-finished flooring therefore the design of this nailer prevented damage to the floor surface during the nailing process. After installing 32 boxes of flooring, the nailer still looks brand new.
Images Product
Buy Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun, Yellow Now
No comments:
Post a Comment