Buy Low Price From Here Now
No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool let’s you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. --Brian D. Olson
What’s in the Box
¼-inch air fitting, 1,000 2-inch brad nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil.
Readmore
Technical Details
- 5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool- Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power
- Nail lock-out feature eliminates dry firing; magazine holds 100 nails
- Includes ¼-inch air fitting, 1,000 1 5/8-inch nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil
- Measures 9-1/4-inches (length); weighs just 2.6-pounds; 7-year warranty
See more technical details
By A. Berry
In addition to the other criticisms of this tool, the nose is assembled in such a way that clearing jams is a big pain. Three hex socket screws have to be removed and the nose safety, depth adjustment assembly, and nose safety/depth adjustment cover taken off before the nose plate can be removed to access the drive channel. Reassembly is not intuitive and rather fiddly. The nose plate is relatively thin such that it once the tip of the drive pin wears to a certain point staples slip between the drive pin and the nose plate, bending the latter outward which allows the staple to get mangled and the gun stuck to the work piece until you yank it off of the deformed staple.
Bottom line, you're much better off spending the extra money for a dedicated brad nailer and a dedicated narrow crown stapler. I've never met a 2-in-1 tool more complicated than a screwdriver that was a good idea, and this one, while far better than a combination wide crown stapler & corrugated nailer I had the misfortune to use once, is no exception.
By Howard Scoggins (Hagerstown, MD United States)
All is well so far. I have not yet used gun however but I have no question that all will be well.
By Yoo Ja Ser
Unlike all the other reviews my experience is better with the 2 in 1 cause unlike the rest of u reviewers, mine always matched my expectations perfectly expect for the fact the safety button on top dose not have a function to turn it off.
By Doug Pug (groton ,ma.)
I have used this gun on numerous projects. Shooting plywood veneer to the backside of cabinetry with staples gives great holding power. Also great for stapling carpet and padded fabrics to "home made" storage ottomans. I have used it on crown moldings with brads and this also works fine, BUT, if a clear finish is desired, you WILL get a "staple sized" divot ! AWESOME, only if you intend on painting your trim work ! ALWAYS TEST your dual purpose gun BEFORE you shoot in a visible area to see what your final result will be. All in all, this gun is great for the average user, but NOT for the SERIOUS cabinet maker where stain and lacquer will be used to finish, as ANY fastener must be concealed to let only the beauty of the wood to be seen... I have yet to experience any problems with the mechanics of this gun and it works very well for me. Once again, TEST FIRE, before you shoot in a visible area to be SAFE !!!
By Just a DYI GUY (Spring Hill, Kansas)
I got the 2 in 1 free when I purchased a Bostitch 15 gauge finish nailer. I haven't used it as a brad nailer, only as a stapler. I would have to say I am a bit disapointed. This gun rarely counter sinks into any materials I've tried it on. It leaves the staples flush with the surface or slightly protruding. The 2 in 1 one has never jammed on me, but I can't in good conscience recommend it either. If I had not gotten it for free I would have returned it for a dedicated finish stapler.
Images Product
Buy Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer Now
No comments:
Post a Comment